Expert Tips and Tricks for Installing a New Shower Unit

Call Today

We have unearthed this article on How to Install a Shower Enclosure down the page on the net and thought it made good sense to share it with you on this page.

An effective shower setup requires careful preparation as well as a lot of job. In many cases, you will certainly need to do 3 kinds of tasks: mounting walls, mounting the plumbing, and ending up walls.

Preparation

Firstly, you have to select the sort of shower that you wish to mount. It is necessary to identify whether the picked shower is capable of dealing with specific systems and can regulate a safe degree of water with the boiler. Most shower units nowadays are created to be adaptable to different water pressures (such as kept hot water as well as cold keys).
It is also vital to consider the water pressure and the preparation of the piping and also water drainage for the shower

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be linked to the bath faucet according to your requirement, and also the water temperature can be readjusted through the taps. Push-on mixers are cheap and also very easy to mount. Nevertheless, although the hose link is easy, it is conveniently removed. In addition, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The pipe and spray of this sort of shower are combined with a bathroom mixer faucet, and the temperature can be changed via the bathroom taps. It is a really cheap choice and also no added plumbing is entailed. Nonetheless, the bath/shower mixers additionally deal with inconvenient temperature level control options.

Handbook Mixer: The pipe and spray of a hands-on mixer shower system are a part of the wall unit and the cold and hot water products are attached to a solitary shutoff The temperature level as well as pressure of the water are controlled via either one or a range of knobs (in more pricey showers). Although temperature control is a lot easier in hands-on mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The tube and spray of this shower kind belong of the wall surface unit and also the cold and hot water materials are attached to a single valve below as well. It is full with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being also warm. One of the most significant benefits of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most costly of the various mixer alternatives.

Power Shower: A power shower is a solitary system consisting of a powerful electric pump that can changing both the water stress and also temperature. This type of shower can be fitted if there is water system from a cold water tank as well as a hot water cyndrical tube. A power shower makes the change of both pressure and also temperature level easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix boiler under keys stress.

Electric Shower: An electrical shower is plumbed into a keys cold water supply and it warms the water electrically. It is very important to note that for this shower kind to be set up, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature level and also pressure to be readjusted through a handle. Versions with temperature stabilisers are much better as they continue to be unaffected by other taps somewhere else being used within the house. A major drawback of electric showers is that the control handle just permits the choice of heats at less pressure, or lower temperatures at a higher pressure. This is troublesome in the winter when the spray is often weak and the mains water is chillier. Nevertheless, this trouble is taken on in some models which are available with a winter/summer setup.

Approach

Relying on the sort of shower you want to install, the shower head must either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
Prior to starting, it is advisable to note the settings of the shower head and control, and also to prepare the pipe-work involved. In addition, the drainage system to get rid of the waste water will require to be planned. Both placements of the cable television course and the shower button will likewise require to be thought about if an instant or electrical shower device is being installed.
Utilize the guideline guide offered with the shower system to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to cut off the supply of water. In order to shield the pipelines, they should be given a waterproof covering and additionally fitted with separating shutoffs. The pipelines can after that be hidden right into the wall surface as well as plastered over to neaten the general appearance.
Fit the base tray, shower head, and also fittings.
Link the main shower control to the pipelines that will certainly be supplying the water (This may require a female screw thread adapter).
Reconnect the water and also test the pipes for any type of leaks, as some may need firm.
If you are mounting an electric shower, bear in mind to turn off the electrical power supply before making any kind of electric connections. Once these links have actually been made (there ought to be guidance within the user's manual), the power supply can be switched over back on.

Changing Water Pressure to Match Your Shower

The cold water tank can be lifted to a higher height (occasionally as low as 150mm (6inches)) by fitting a solid wooden assistance below it - perhaps composed of struts and also blockboards. If you choose this alternative, the main and distribution pipelines will likewise need to be raised to satisfy the brand-new elevation of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected into the power supply in order to operate.

Piping as well as Water drainage

It is best to make use of 15mm diameter supply pipes, as well as make the go to the shower as brief and also straight as feasible so regarding maintain maximum stress as well as minimise warm loss. In addition, by reducing making use of joints for pipeline edges, you can reduce the resistance in the flow of the water supply. You can achieve this by flexing the pipelines rather.

Many Common Mistakes

Violating or ignoring neighborhood code constraints.

Using pipelines that are as well small.

Affixing copper to galvanized without utilizing a brass or dielectric fitting in between the two.

Not making use of tape or pipe substance at threaded joints.

Uneven your fixtures when mounting them.

Not installing an air void filling for components.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the finished wall surface remains in place.

Not appropriately aligning tubes right into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

When transforming the water back on in your house, constantly run the outdoors hose shutoff or purge your commodes to hemorrhage dirt and air from the lines. This debris can cause issues in your sink faucets as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm certainly very interested in How to Install a Freestand and I really hope you liked the blog post. Sharing is good. Helping others is fun. Thank you for going through it.

Learn More